HINCOL BONDCOAT C50BP-76 (Bulk)
1
Packaging2
Details3
Done🚛
Bulk Supply
Per Tanker / MT
🛢️
MS Drum
200 Kg / drum
🛢️
RC Drum
200 Kg / drum
🪣
HDPE Drum
200 Kg / drum
QuantityHow many?
1
1 Drum= 200 Kg
Fill your details — WhatsApp will open with a ready-made inquiry. Hit Send and our team replies in 24 hours.
or call directly
📞 022-2302-3250 · HINCOL Helpline
WhatsApp Opened!
Press Send — reply within 24 hours.
Product : HINCOL BONDCOAT C50BP 76
Packaging : –
Quantity : –
WhatsApp : +91 8655968897
🔒 Your details are only used for your WhatsApp inquiry. No spam.
HINCOL BONDCOAT C50BP 76
Polymer Modified | EN 13808 | Tack Coat🌡️ Max Pavement Temperature: 76°C
HINCOL BONDCOAT C50BP 76 is a high-performance polymer-modified cationic bitumen emulsion conforming to EN 13808, engineered for tack coat applications in extreme traffic load conditions and high-temperature regions. The performance grade of 76°C makes it the highest-rated BONDCOAT grade — suitable for India’s hottest climatic zones and busiest freight corridors where lower-grade emulsions may fail.
As part of HINCOL’s bitumen emulsion range, BONDCOAT C50BP 76 is designed by COLAS SA France, backed by global expertise in polymer-modified bitumen emulsions across 50+ countries.
BONDCOAT Performance Grades — Choose by Climate & Traffic
76°C ↑
C50BP 76
This page — Extreme loads, hottest climates
🌡️
76°C Performance Grade
Withstands pavement temperatures up to 76°C — designed for India’s extreme summer conditions in Rajasthan, Gujarat, and Deccan plateau regions.
🛡️
Polymer Modified
Polymer modification improves flexibility, crack resistance, and aggregate adhesion — superior interlayer bond under heavy axle loads.
💧
Water Resistance
Protects the pavement from moisture damage and oxidation at the interlayer interface — enhancing long-term structural durability.
🔗
Strong Bonding
Prevents delamination and slippage cracking between bituminous layers — especially critical on expressways and freight-heavy national highways.
Technical Specifications — BONDCOAT C50BP 76
Product Properties
- StandardEN 13808
- GradeC50BP 76
- TypePolymer Modified Cationic
- Max Pavement Temperature76°C
- Polymer ModifiedYes
- Shelf Life6 months (below 50°C)
Application
- Primary UseTack Coat
- Tack Coat Rate0.2 – 0.4 kg/m²
- Spray Temperature40°C – 70°C
- Curing Time15–60 min (weather-dependent)
- Surface RequirementClean, dry pavement
- Do Not DiluteUse as supplied
Application Rate — Tack Coat (MoRTH Table 500-2)
| Surface Type | Rate (kg/10 m²) |
|---|---|
| Normal bituminous surfaces | 2 – 4 kg/10m² |
| Dry / hungry bituminous surfaces | 2.5 – 4 kg/10m² |
| Cement concrete pavement | 3 – 3.5 kg/10m² |
Spray temperature: 40–70°C. Apply on clean, dry surface. Allow full break before laying overlay.
Explore Other HINCOL Bitumen Emulsion Products
Order HINCOL BONDCOAT C50BP 76
Available in Bulk & drums across India. Contact for pricing and project guidance.
Request a QuotationHINCOL FogSeal — Product Overview
Watch how HINCOL FogSeal and BONDCOAT emulsions protect and rejuvenate bituminous pavement surfaces on highways and runways.
FAQs
What is BONDCOAT C50BP 76 used for?
BONDCOAT C50BP 76 is a polymer-modified cationic bitumen emulsion used as a tack coat between bituminous pavement layers in extreme traffic load conditions and high-temperature regions. The 76°C performance grade indicates it withstands maximum pavement temperatures up to 76°C without losing bond effectiveness.
What does C50BP 76 mean?
C = Cationic | 50 = Minimum 50% binder content | B = Breaking agent | P = Polymer modified | 76 = Maximum pavement temperature grade of 76°C. Conforms to EN 13808 (European standard for bitumen emulsions).
What is the application rate for BONDCOAT C50BP 76?
Tack coat application rate: 0.2 – 0.4 kg/m² (2 – 4 kg per 10 sq.m), depending on surface condition. Apply at 40–70°C using a calibrated bitumen distributor. Allow full break before laying asphalt overlay.
What is the shelf life?
BONDCOAT C50BP 76 has a shelf life of 6 months when stored at temperatures below 50°C. Never allow to freeze. Store away from direct sunlight.
When should C50BP 76 be used instead of C50BP 70?
Use C50BP 76 when: pavement temperatures regularly exceed 70°C (hot regions), the project involves very heavy traffic (expressways, freight corridors), or the contract requires the 76°C performance grade per EN 13808. For moderate conditions, C50BP 64 or C50BP 70 may be sufficient.
Certified Quality
EN 13808 | C50BP 76 Performance Grade | Polymer Modified | ISO 9001:2015 | COLAS SA France Technology
EN 13808ISO 9001:201576°C Grade