HINCOL HINPRIME Emulsion SS1 ASTM(Bulk)

HINPRIME SS1 (ASTM Grade)

Prime Coat Emulsion – ASTM Compliant

HINPRIME SS1 is a Slow Setting Cationic Bitumen Emulsion conforming to ASTM standards, specially designed for prime coat applications on granular and prepared base layers.

Primary application: Prime Coat to penetrate and bind granular surfaces prior to bituminous layer application, ensuring strong adhesion and improved pavement performance.

💧

Deep Penetration

Low viscosity allows effective penetration into granular and WMM surfaces.

⏳

Controlled Setting

Slow setting nature ensures sufficient time for uniform absorption.

🔗

Improved Bonding

Enhances adhesion between base layer and subsequent bituminous layers.

Technical Specifications (ASTM Compliant)

Physical Properties

  • Type Slow Setting Cationic Emulsion (SS1)
  • Standard ASTM Specification
  • Application Prime Coat
  • Penetration High on Granular Surfaces
  • Adhesion Strong Base Bonding

Application Guidelines

  • Surface Preparation: Surface must be clean, properly compacted and free from loose dust.
  • Application Method: Apply uniformly using mechanical sprayer/distributor.
  • Recommended Rate: Typically 0.7 – 1.0 kg/m² depending on porosity of surface.

Success Story – Industrial Road Project

Prime Coat Application using HINPRIME SS1

Base Preparation for Asphalt Overlay

Improved Surface Stability

Challenge: Achieving uniform penetration on highly porous granular base in an industrial access road project.

Solution: HINPRIME SS1 ensured consistent absorption and strong bonding before asphalt overlay placement.

Application Type Prime Coat
Performance Enhanced Layer Adhesion

Frequently Asked Questions

What is HINPRIME SS1 used for?

HINPRIME SS1 is primarily used as a Prime Coat to prepare granular base layers before laying asphalt.

Is HINPRIME SS1 ASTM compliant?

Yes, HINPRIME SS1 conforms to ASTM specifications for slow setting cationic bitumen emulsion.

What is the recommended application rate?

Typically between 0.7 – 1.0 kg/m² depending on surface porosity and project requirements.

International Standard Compliance

Manufactured as per ASTM quality standards

ASTM Compliant Quality Tested