HINCOL ANTICORR
Special Products · Anti-Corrosive
HINCOL ANTICORR Bitumen Paint
A black, solvent-borne bitumen paint exceeding IS 9862 — providing economical anti-corrosive, waterproof, and weatherproof protection on iron, steel, timber, concrete, and masonry surfaces.
HINCOL ANTICORR Bitumen Paint
IS 9862 | Solvent-BorneAs part of HINCOL\’s Special Bitumen Products range, for a wide range of common building materials — particularly iron, steel, timber, concrete, fibre reinforced cement panels, and masonry.
It produces a flexible, quick-drying coating that is waterproof, weatherproof, and corrosion resistant — exceeding the IS 9862 specifications. The low viscosity formulation ensures easy application by brush or spray with high penetrating power into porous substrates.
Extensively used across construction, agriculture, and infrastructure — from protecting vehicle chassis and drinking water tanks to priming decks before waterproofing membrane installation.
🏗️ Structural Metalwork
Rainwater gutters, downpipes, corrugated iron sheets, fire escapes, stairways, ladders, fencing, and piling.
🏛️ Waterproofing & Basements
Deck priming before waterproofing installation. Protection of basements, foundation walls, underground structures.
🪣 Tanks & Piling
Storage tanks including drinking water tanks, concrete posts, piling, and structural metalwork in aggressive environments.
🌾 Agricultural Use
Farm fences, corrugated iron structures, equipment bases — widely used in Indian agriculture for many years.
🚗 Vehicle Chassis
Undercoating and protection of vehicle chassis against moisture, road salt, and corrosive attack.
🧱 Masonry & Concrete
Seals pores in concrete and masonry providing long-term waterproofing and chemical resistance.
Advantages of HINCOL ANTICORR
Why engineers and contractors choose HINCOL ANTICORR.
🖌️
Low Viscosity — Easy Application
Free-flowing formula enables easy brush or spray application, ensuring uniform coverage on irregular surfaces.
⚗️
Acid, Base & Salt Resistance
Good resistance to mild acids, alkalis, and salt solution — ideal for coastal and industrial environments.
❄️
Freeze-Thaw Resistance
High resistance to freeze-thaw cycles — maintains film integrity in cold climates and high altitudes.
🚫🔥
No Heating Required
Cold-applied at ambient temperature — no fuel costs, no hot-work permits, no fire hazards during application.
💧
Water Impermeable Film
Forms a continuous water-impermeable bituminous film preventing moisture ingress into the substrate.
🔗
Improves Waterproofing Adhesion
Improves adhesion of bituminous waterproofing systems when used as primer coat on concrete and metal.
🧹
Binds Residual Dust
Binds leftover dust particles on substrate surface — improving bond of waterproofing overlays.
⚡
Quick Drying
Touch dry in 30 min, completely dry in 1.5 hours — faster than water-based alternatives.
💰
Economical Protection
High coverage rate and long-term durability make ANTICORR one of the most cost-effective anti-corrosion coatings available.
Technical Specifications
HINCOL ANTICORR Bitumen Paint — Exceeds IS 9862
Product Properties
| Parameter | Value | Standard |
|---|---|---|
| Viscosity | 4–24 seconds | IS 1206 Part 1 |
| Specific Gravity | 0.9 ± 0.05 | — |
| Solid Content, Min | 50% by Weight | IS 1213 |
| Colour | Black | — |
| Type | Solvent-Borne Bitumen Paint | — |
| Touch Dry | ~30 minutes | — |
| Completely Dry | 1.5 hours | — |
| Safe Margin (Concrete) | 2 hours before overlay | — |
| Rain Resistance | Within 20–30 min | — |
| Application | Brush or Spray | — |
| IS Standard | Exceeds IS 9862 | — |
| Packing | 25 Litre Container | — |
Coverage Rates
🔩 Non-Porous (Iron / Steel)
~10 sqm / litre
Smooth metal surfaces yield highest coverage.
🧱 Porous (Concrete / Masonry)
~8 sqm / litre
Porous surfaces absorb more. High porosity may need two coats.
*Indicative. Actual consumption depends on surface porosity.
Application Method
1
Surface Preparation
Clean surface — free from oil, grease, dirt, dust and loose debris. Remove loose rust on metal with wire bristle brush.
2
Check Moisture
Surfaces should preferably be dry. ANTICORR adheres to damp but not wet surfaces.
3
Apply Coating
Apply by brush or spray in one even, generous coat across the entire surface ensuring complete coverage.
4
Allow to Dry
Touch dry ~30 min. Completely dry 1.5 hours. Allow 2-hour margin on concrete before overlay.
⏱️ Touch Dry~30 minutes
✅ Completely Dry1.5 hours
🧱 Concrete Safe Margin2 hours before overlay
🌧️ Rain ResistanceWithin 20–30 minutes
Handling, Storage & Safety
Solvent-based product — follow handling precautions for safe use.
⚠️ HANDLING PRECAUTIONS
- Wear protective gloves and barrier cream on exposed skin.
- Avoid smoking, hot lights, naked flames, and creating sparks.
- Never take the product internally.
- Avoid contact with skin, eyes, and non-protective clothing.
- Ensure the work area is well ventilated to avoid solvent vapour buildup.
- Dried bitumen on skin may be removed with a proprietary hand cleanser.
🆘 EMERGENCY ACTION
- Vapour inhalation: Remove to fresh air immediately. Seek medical attention.
- Eye contact: Irrigate with clean cold water. Seek medical attention.
- Fire: Use CO₂, dry chemical, foam, sand or earth.
- Tool cleaning: Clean with paraffin or white spirit before compound sets.
- Storage: Indefinite in undamaged, tightly sealed containers away from heat.
Order / Inquiry — HINCOL ANTICORR
Bitumen Paint · IS 9862 · Anti-Corrosive Coating
⚡ 24-hr response 🇮🇳 Pan-India 🔒 No spam
Fill details → WhatsApp opens with ready inquiry
📦 Available in 25 Litre Containers
Number of Containers
Your Name *
Company (optional)
Delivery Location *
Frequently Asked Questions
What is HINCOL ANTICORR Bitumen Paint?
HINCOL ANTICORR is a black, solvent-borne bitumen paint exceeding IS 9862. It provides anti-corrosive, waterproof, and weatherproof protection on iron, steel, timber, concrete, fibre reinforced cement panels, and masonry. It produces a flexible, quick-drying protective film.
What surfaces and applications is it suitable for?
Suitable for: rainwater gutters, downpipes, storage tanks, corrugated iron sheets, fire escapes, stairways, ladders, piling, concrete posts, fencing, vehicle chassis, drinking water tanks, agricultural fences, and as primer under bituminous waterproofing on decks and basements.
What IS standard does HINCOL ANTICORR conform to?
HINCOL ANTICORR exceeds IS 9862 — the Indian Standard for bituminous compounds used in anti-corrosion and waterproofing applications on building materials.
What is the coverage rate?
Approximately 10 sqm per litre on non-porous surfaces (metal/steel) and 8 sqm per litre on porous surfaces (concrete/masonry).
How long does it take to dry?
Touch dry after approximately 30 minutes. Completely dry after 1.5 hours. For concrete and screeded surfaces, allow a 2-hour drying margin before applying waterproofing overlay.
What packing size is available?
Available in 25 Litre containers. Shelf life is indefinite in undamaged, tightly sealed containers away from heat sources.
Quality & Compliance
Exceeds IS 9862 | Solvent-Based | Anti-Corrosive | ISO 9001:2015 | NABL-Accredited Lab
IS 9862Anti-CorrosiveISO 9001:2015